[elrepo] video4linux on CentOS 5 2.6.18-128.4.1.el5xen - module not found

[Phil Perry]

Philippe wrote:
> Phil Perry a écrit :
>> Philippe wrote:
>>   
>>> Great !!!!
>>> no, it was a joke. :-)
>>>
>>> I've got 3 QuickCam Messanger
>>> [root at aberlour]# lsusb
>>> Bus 001 Device 001: ID 0000:0000
>>> Bus 005 Device 001: ID 0000:0000
>>> Bus 005 Device 002: ID 046d:08da Logitech, Inc. QuickCam Messanger
>>> Bus 004 Device 001: ID 046d:08da Logitech, Inc. QuickCam Messanger
>>> Bus 004 Device 002: ID 046d:08da Logitech, Inc. QuickCam Messanger
>>>
>>>
>>> As I said in a previous post, I succeeded to use my webcams with atrpms' 
>>> gspca package http://atrpms.net/dist/el5/gspca/
>>> unfortunately they do not yet have a module for the brand new 128.4.1 
>>> kernel xen.
>>>
>>> ELRepo looks interesting in the fact you do not need RPM for each 
>>> sub-version
>>>
>>> Do you have an idea on how to use a gspca module with ELRepo and CentOS5?
>>>     
>> It doesn't look like our package is going to work on xen kernels - sorry.
>>
>>   
> Phil
> 
> everything works by now. I explain
> 
> I run the new 128.4.1 xen kernel.
> I have downloaded. 
> http://mxhaard.free.fr/spca50x/Download/gspcav1-20071224.tar.gz
> Installed kernel-source
> compile gspcav1
> 
> I, now, have both xen and webcams working.
> 
> When I tried your package with the normal kernel, I realized that the 
> video quality was better and there was no error in the syslog such as :
> 
> Aug  8 00:26:18 aberlour kernel: /sources/gspcav1-20071224/gspca_core.c: 
> [spca50x_move_data:1611] ISOC data error: [0] len=0, status=-18
> Aug  8 00:26:18 aberlour kernel:
> Aug  8 00:26:18 aberlour kernel: /sources/gspcav1-20071224/gspca_core.c: 
> [spca50x_move_data:1611] ISOC data error: [1] len=0, status=-18
> Aug  8 00:26:18 aberlour kernel:
> Aug  8 00:26:18 aberlour kernel: /sources/gspcav1-20071224/gspca_core.c: 
> [spca50x_move_data:1611] ISOC data error: [2] len=0, status=-18
> Aug  8 00:26:18 aberlour kernel:
> Aug  8 00:26:18 aberlour kernel: /sources/gspcav1-20071224/gspca_core.c: 
> [spca50x_move_data:1611] ISOC data error: [3] len=0, status=-18
> Aug  8 00:26:18 aberlour kernel:
> Aug  8 00:26:18 aberlour kernel: /sources/gspcav1-20071224/gspca_core.c: 
> [spca50x_move_data:1611] ISOC data error: [4] len=0, status=-18
> Aug  8 00:26:18 aberlour kernel:
> Aug  8 00:26:20 aberlour kernel: /sources/gspcav1-20071224/gspca_core.c: 
> [spca50x_move_data:1611] ISOC data error: [0] len=0, status=-18
> Aug  8 00:26:20 aberlour kernel:
> Aug  8 00:26:20 aberlour kernel: /sources/gspcav1-20071224/gspca_core.c: 
> [spca50x_move_data:1611] ISOC data error: [1] len=0, status=-18
> Aug  8 00:26:20 aberlour kernel:
> Aug  8 00:26:20 aberlour kernel: /sources/gspcav1-20071224/gspca_core.c: 
> [spca50x_move_data:1611] ISOC data error: [2] len=0, status=-18
> Aug  8 00:26:20 aberlour kernel:
> Aug  8 00:26:20 aberlour kernel: /sources/gspcav1-20071224/gspca_core.c: 
> [spca50x_move_data:1611] ISOC data error: [3] len=0, status=-18
> Aug  8 00:26:20 aberlour kernel:
> 
> 
> 
> Consodering that, I'd like to try to compile the gspcav module you have 
> inserted in your ELrepo.
> Where can I find this gspcav module ?
> 
> regards
> Philippe
> 

You can get the latest source code from:

http://linuxtv.org/hg/v4l-dvb/archive/tip.tar.bz2

Just extract the source, and run make && make install

The source code you used is old and no longer maintained at that 
location - it's now all part of the v4l-dvb project.

Good luck,

Phil