[elrepo] Fglrx 11.5

Phil Perry phil at elrepo.org
Sat Jun 18 04:16:31 EDT 2011


On 15/06/11 19:21, Steve Cleveland wrote:

>
> # ll /usr/lib64/fglrx/libatiuki.so.1*
> lrwxrwxrwx. 1 root root    16 Jun 15 10:59
> /usr/lib64/fglrx/libatiuki.so.1 ->  libatiuki.so.1.0*
> -rwxr-xr-x. 1 root root 44725 May 12 07:46
> /usr/lib64/fglrx/libatiuki.so.1.0*
>
> The xorg.conf looks pretty simple. Do some paths need to be added?
>
>
> Section "ServerLayout"
>           Identifier     "aticonfig Layout"
>           Screen      0  "aticonfig-Screen[0]-0" 0 0
> EndSection
>
> Section "Module"
> EndSection
>
> Section "Monitor"
>           Identifier   "aticonfig-Monitor[0]-0"
>           Option      "VendorName" "ATI Proprietary Driver"
>           Option      "ModelName" "Generic Autodetecting Monitor"
>           Option      "DPMS" "true"
> EndSection
>
> Section "Device"
>           Identifier  "aticonfig-Device[0]-0"
>           Driver      "fglrx"
>           BusID       "PCI:1:0:0"
> EndSection
>
> Section "Screen"
>           Identifier "aticonfig-Screen[0]-0"
>           Device     "aticonfig-Device[0]-0"
>           Monitor    "aticonfig-Monitor[0]-0"
>           DefaultDepth     24
>           SubSection "Display"
>                   Viewport   0 0
>                   Depth     24
>           EndSubSection
> EndSection
>
> Section "Files"
> EndSection
>
>
>    - Steve


Hi Steve,

Please try the updated 11.5-3 drivers currently syncing to the el6 
elrepo-testing repository to see if those fix the issue.

If not, and wrt your xorg.conf above, a couple suggestions of things to try:

1. Try adding the following "Files" section

Section "Files"
         ModulePath   "/usr/lib64/xorg/modules/extensions/fglrx"
         ModulePath   "/usr/lib64/xorg/modules"
EndSection

and rebooting.

2. Make sure you have /etc/ld.so.conf.d/ati.conf and not 
/etc/ld.so.conf.d/ati.conf.disable. The ati-config-display utility is 
supposed to toggle these back and forth when enabling/disabling the ATI 
driver. If you need to rename the file, please run '/sbin/ldconfig' 
afterwards before rebooting.




More information about the elrepo mailing list