[elrepo] Broadcom Wlan connected but without Internet on RHEL 8.2

[Prabir Kr Sarkar]

Thanks Steve. Is there any possibility that ELRepo will provide support
for  Broadcom BCM4313 for EL8 in future? If yes, any estimate? Thanks again.

- Prabir

On Fri, Jun 12, 2020 at 10:02 PM Steve Tindall <s10dal at elrepo.org> wrote:

> On 6/12/20 4:16 AM, Prabir Kr Sarkar wrote:
>
> Hello Gurus,
>                     Stuck with a strange issue. Please help. With my RHEL
> 8.2 the Broadcom adapter came up properly and connected to the Wireless
> hotspot. But I failed to connect to the Internet! In the settings of the
> connected Wireless SSID I see all IPV4 and IPV6 settings set to automatic
> (as Automatic DHCP, DNS and Routes) as expected. But still the IPv4 address
> seems to be set to a private IP!
>
> IPV4 Address  192.168.43.147
> Default Route  192.168.43.1
>               DNS   192.168.43.1
>
> *Environment*:
>
> # cat /etc/redhat-release
> Red Hat Enterprise Linux release 8.2 (Ootpa)
>
> # lspci | grep -i wireless
> 12:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn
> Wireless Network Adapter (rev 01)
>
> In #ifconfig -a the wlan interface shows up as *wlp18s0b1*
>
> Can someone please help me with this? Thanks in advance.
>
> *Thanks and Regards*
> *Prabir Sarkar*
>
>
> ELRepo does not offer support for EL8 Broadcom BCM4313 or other hardware
> supported by the Boadcom Linux hybrid driver.
>
>
> https://www.broadcom.com/support/download-search?pf=Wireless+LAN+Infrastructure
>
> Steve
> _______________________________________________
> elrepo mailing list
> elrepo at lists.elrepo.org
> http://lists.elrepo.org/mailman/listinfo/elrepo
>


-- 
*Thanks and Regards*
*Prabir Sarkar*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elrepo.org/pipermail/elrepo/attachments/20200615/0379b064/attachment.html>