[elrepo] kmod-sata_via module for CentOS7
chuck elliot
c.elliot at pobox.com
Mon Jul 19 06:27:52 EDT 2021
5* service or what?! :o)
On 18/07/2021 11:43 am, Phil Perry wrote:
> On 13/07/2021 18:13, Tristan Evans wrote:
>> That would be so amazing. Thank you!
>>
>> On Tue, Jul 13, 2021 at 1:03 PM Akemi Yagi <amyagi at gmail.com
>> <mailto:amyagi at gmail.com>> wrote:
>>
>> On Mon, Jul 12, 2021 at 4:51 AM Tristan Evans
>> <azurepancake at gmail.com <mailto:azurepancake at gmail.com>> wrote:
>>
>> > On Sun, Jul 11, 2021 at 12:23 PM Akemi Yagi <amyagi at gmail.com
>> <mailto:amyagi at gmail.com>> wrote:
>> >>
>> >> On Sun, Jul 11, 2021 at 9:18 AM Tristan Evans
>> <azurepancake at gmail.com <mailto:azurepancake at gmail.com>> wrote:
>> >> >
>> >> > Hi, I sent this before I was subscribed and I'm not sure if it
>> got out. I am now subscribed and sending. Apologies if I created a
>> duplicate message.
>> >> >
>> >> > I'm running into an issue with the "sata_via" module on
>> CentOS7.
>> >> >
>> >> > I have a system that has super high I/O latency when using
>> this module. The system is pretty much unusable. If I install
>> CentOS8 and load the kmod-sata_via module from ELREPO, everything
>> works great!
>> >> >
>> >> > I'm not sure what the difference is between the CentOS7
>> "sata_via" module and the ELREPO one, but whatever it is, it fixes
>> my issue.
>> >> >
>> >> > The problem is, for reasons I don't think it is necessary to
>> get into, I can't go to CentOS8. And sadly, I can't seem to find the
>> kmod-sata_via module for CentOS7 (I would imagine that is because it
>> is already part of the system).
>> >> >
>> >> > I'm not too sure what to do at this point to get this system
>> running properly on CentOS7. This my be a very stupid question, but
>> I'm asking out of desperation, is there anyway I can somehow obtain
>> a kmod-sata_via module for CentOS7?
>> >> >
>> >> > Sorry if I'm lacking any details, still trying to learn a lot
>> of this stuff. I will be happy to provide anything that may be
>> useful.
>> >> >
>> >> > Thanks,
>> >> > Tristan
>> >>
>> >> Can you provide the device ID pairing [xxxx:yyyy] as reported by
>> 'lspci -nn' ?
>> >>
>> >> Akemi
>> >
>> > Hi Akemi, of course:
>> >
>> > 00:0f.0 IDE interface [0101]: VIA Technologies, Inc. VT8251
>> Serial ATA Controller [1106:5287] (rev 20)
>> >
>>
>> We are trying to see if we can backport the code from a newer
>> kernel.
>>
>> Akemi
>
>
> Hi Tristan,
>
> Apologies for the slow response!
>
> I've backported the sata_via driver from the latest 5.13.2 kernel for
> you to try. I've uploaded to our testing repository and the package
> should be available on our mirrors shortly.
>
> kmod-sata_via-2.6-1.el7_9.elrepo.x86_64.rpm
>
> If you have the elrepo repository set up, you can install with:
>
> yum --enablerepo=elrepo-testing install kmod-sata_via
>
> Once installed, I'd suggest you reboot to test the new module.
>
> Please let us know if this updated driver works any better for you.
>
> Phil
>
> _______________________________________________
> elrepo mailing list
> elrepo at lists.elrepo.org
> http://lists.elrepo.org/mailman/listinfo/elrepo
More information about the elrepo
mailing list