<div dir="ltr">Hi,<div>Trying to get centos7 installed on my laptop (Thinkpad P70). Currently, windows10 is installed on main sata hdd. I&#39;m installing centos7 to a usb thumb drive. Once everything is working, I&#39;ll reinstall centos on an external sdd and have dual boot system. The install is fine (well not really yet) (using centos7 minimal .iso) I&#39;m able to yum update all updates and upgrade kernel. 3.10.0.862.6.3.el7. I installed gnome desktop. Currently, the bios graphics is set to hybrid graphics and secure boot is disabled. gnome was working prior to nvidia driver setup.</div><div><br></div><div>Issues I ran into, initial OS install locked up, I restarted the install, that completed.</div><div>During yum install of updates and kernel the system would freeze every now and then and then would unfreeze and I was able to input commands again at the prompt. Searching around about the freezing, I found nouveau might be the issue and to blacklist it and install nvidia drivers. The install went good, see attached output, just seems something is not right in the configuration. I have used nvidia-xconfig for xorg.conf</div><div><br></div><div><div>I&#39;m having an issue when using startx; screen found, but none have a usable configuration. In the xorg.2.log output (attached) I&#39;m able to ctrl+c then get control</div><div>back at the prompt. If I set AllowEmptyInitialConfiguration, reboot, startx it locks up, I&#39;m able to ssh into my laptop then reboot. Even with nouveau blacklisted and nvidia drivers loaded, the system still freezes momentarily (10-15 seconds) then I have control at the prompt again. This freezing happens quite a few times.</div></div><div><br></div><div>The output in nvidia.driver.txt (attached) should be ok, I just needed to fix formatting from transferring it from cent -&gt; win.</div><div><br></div><div>Any suggestions/ideas on what I can try to get x/gnome working and also the </div><div>system freezes?</div><div><br></div><div>Thanks</div><div>Doug</div></div>