[elrepo] Fwd: [lm-sensors] Gigabyte GA-P35-DS3P - VID Zero value

[Simon Wilson]

Quoting Phil Perry <phil at elrepo.org>:

> Simon Wilson wrote:
>> I have posted the query below to the lm_sensors mailing list, but
>> thought it may be worth sending to this list too.
>> Using kmod-it87 and lm_sensors 2.10.8 from elrepo, I have it
>> mostly all configured, but the VID value is 0.000V.

> Same here. I have a near identical Gigabyte P35-DS4 board.
>
> $ sensors
> it8718-isa-0290
> Adapter: ISA adapter
> VCore:     +1.12 V  (min =  +1.01 V, max =  +1.34 V)
> VDDR:      +1.87 V  (min =  +1.71 V, max =  +1.89 V)
> +3.3V:     +3.33 V  (min =  +3.14 V, max =  +3.47 V)
> +5V:       +5.05 V  (min =  +4.76 V, max =  +5.24 V)
> +12V:     +12.16 V  (min = +11.39 V, max = +12.61 V)
> VBat:      +3.30 V
> CPU Fan:  1467 RPM  (min = 1000 RPM)
> M/B Temp:    +40°C  (low  =   +10°C, high =   +50°C)   sensor = thermistor
> CPU Temp:    +25°C  (low  =   +10°C, high =   +70°C)   sensor = diode
> vid:      +0.000 V
>
> coretemp-isa-0000
> Adapter: ISA adapter
> Core 0:      +27°C  (high =  +100°C)
>
> coretemp-isa-0001
> Adapter: ISA adapter
> Core 1:      +22°C  (high =  +100°C)
>
> coretemp-isa-0002
> Adapter: ISA adapter
> Core 2:      +22°C  (high =  +100°C)
>
> coretemp-isa-0003
> Adapter: ISA adapter
> Core 3:      +25°C  (high =  +100°C)
>

OK... thanks Phil. Any ideas on fixing it? Or not worth worrying about?


-- 
Simon Wilson
www.simonandkate.net