[elrepo] Fwd: [lm-sensors] Gigabyte GA-P35-DS3P - VID Zero value

[Phil Perry]

Simon Wilson wrote:
> I have posted the query below to the lm_sensors mailing list, but 
> thought it may be worth sending to this list too.
> 
> Using kmod-it87 and lm_sensors 2.10.8 from elrepo, I have it mostly all 
> configured, but the VID value is 0.000V.
> 
> Any ideas from this side?
> 
> Cheers
> Simon.
> 

Same here. I have a near identical Gigabyte P35-DS4 board.

$ sensors
it8718-isa-0290
Adapter: ISA adapter
VCore:     +1.12 V  (min =  +1.01 V, max =  +1.34 V)
VDDR:      +1.87 V  (min =  +1.71 V, max =  +1.89 V)
+3.3V:     +3.33 V  (min =  +3.14 V, max =  +3.47 V)
+5V:       +5.05 V  (min =  +4.76 V, max =  +5.24 V)
+12V:     +12.16 V  (min = +11.39 V, max = +12.61 V)
VBat:      +3.30 V
CPU Fan:  1467 RPM  (min = 1000 RPM)
M/B Temp:    +40°C  (low  =   +10°C, high =   +50°C)   sensor = thermistor
CPU Temp:    +25°C  (low  =   +10°C, high =   +70°C)   sensor = diode
vid:      +0.000 V

coretemp-isa-0000
Adapter: ISA adapter
Core 0:      +27°C  (high =  +100°C)

coretemp-isa-0001
Adapter: ISA adapter
Core 1:      +22°C  (high =  +100°C)

coretemp-isa-0002
Adapter: ISA adapter
Core 2:      +22°C  (high =  +100°C)

coretemp-isa-0003
Adapter: ISA adapter
Core 3:      +25°C  (high =  +100°C)