[elrepo] Fwd: [lm-sensors] Gigabyte GA-P35-DS3P - VID Zero value

[Simon Wilson]

I have posted the query below to the lm_sensors mailing list, but  
thought it may be worth sending to this list too.

Using kmod-it87 and lm_sensors 2.10.8 from elrepo, I have it mostly  
all configured, but the VID value is 0.000V.

Any ideas from this side?

Cheers
Simon.



Begin forwarded message:

> From: Simon Wilson <simon at simonandkate.net>
> Date: 19 October 2009 4:45:16 PM GMT+10:00
> To: lm-sensors at lm-sensors.org
> Subject: [lm-sensors] Gigabyte GA-P35-DS3P - VID Zero value
>

> I am soooo close to getting this working properly.
>
> I have a GA-P35-DS3P motherboard, with an E6850 Core 2 Duo  
> processor. The machine is running CentOS 5.3. It has an it8718  
> sensors chip.
>
> I have installed lm_sensors 2.10.8 and the kmod-it87 driver from elrepo.org 
>  (needed because of the 'old' CentOS 2.6.18 kernel), and all is  
> basically working. A clear sensors output reads:
>
> it8718-isa-0290
> Adapter: ISA adapter
> in0:       +1.12 V  (min =  +0.00 V, max =  +0.00 V)   ALARM
> in1:       +1.87 V  (min =  +1.71 V, max =  +1.89 V)
> in2:       +3.22 V  (min =  +3.14 V, max =  +3.47 V)
> in3:       +2.91 V  (min =  +2.83 V, max =  +3.12 V)
> in4:       +0.85 V  (min =  +2.85 V, max =  +3.15 V)   ALARM
> in5:       +0.05 V  (min =  +0.85 V, max =  +1.09 V)   ALARM
> in6:       +0.03 V  (min =  +1.12 V, max =  +1.28 V)   ALARM
> in7:       +3.12 V  (min =  +2.85 V, max =  +3.15 V)
> in8:       +3.30 V
> fan1:     1424 RPM  (min =  600 RPM)
> fan2:        0 RPM  (min = 3994 RPM)
> fan3:        0 RPM  (min =    0 RPM)
> fan4:        0 RPM  (min =    0 RPM)
> temp1:       +30°C  (low  =   +10°C, high =   +60°C)    
> sensor = thermistor
> temp2:       +26°C  (low  =   +10°C, high =   +70°C)    
> sensor = diode
> temp3:        -2°C  (low  =  +127°C, high =  +127°C)    
> sensor = disabled
> vid:      +0.000 V
>
> Using the configuration from http://www.lm-sensors.org/wiki/Configurations/Gigabyte/G33-DS3R 
>  which also uses the 8718 I am now at this:
>
> it8718-isa-0290
> Adapter: ISA adapter
> Vcore:     +1.04 V  (min =  +0.00 V, max =  +0.00 V)   ALARM
> Vram:      +1.87 V  (min =  +1.71 V, max =  +1.89 V)
> +3.3V:     +3.22 V  (min =  +3.14 V, max =  +3.47 V)
> +5V:       +4.89 V  (min =  +4.76 V, max =  +5.24 V)
> +12V:     +12.48 V  (min = +11.39 V, max = +12.61 V)
> Vbat:      +3.30 V
> CPU Fan:  1421 RPM  (min =  600 RPM)
> NBr Temp:    +30°C  (low  =   +10°C, high =   +60°C)    
> sensor = thermistor
> CPU Temp:    +26°C  (low  =   +10°C, high =   +70°C)    
> sensor = diode
> vid:      +0.000 V
>
> Which is perfect apart from one thing - the 0.000 V value for VID,  
> which is then also throwing off Vcore (in0) as that is calculated  
> from VID (>95 <105%).
>
> Can anyone help me work out why VID is reading 0.000?
>
> Thanks
>
>
>
> -- 
> Simon Wilson
> www.simonandkate.net
>
> _______________________________________________
> lm-sensors mailing list
> lm-sensors at lm-sensors.org
> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.elrepo.org/pipermail/elrepo/attachments/20091019/c4af8e24/attachment.html>